PRIZM 5.1

REAL TIME SETTINGS using our R.I.C.E. editor ! UNLEASH THE FORCE of your CREATIVITY !

PRIZM is a variant of the Petit Crouton on which the current regulator was removed and the power supply design was adapted for single cell. In addition, a real time color changing was developped which allows up to 10 profiles to be browsed within a font using the aux. switch and the activator switch.
It also features up to SIX sound fonts and 4 accent LEDs 
and features Trident™ to control secondary blades (quillons) as seen on some recent sabers.

Owners Manual 

The board comes with 3 sound banks Light Meat, Grey Meat and Dark Meat, installed on the microSD. If you would like to purchase additional sound fonts please visit SaberFont.com

All the details and specs of the PRIZM v5.1 here
Dimensions : 39.30x20.33x5 mm - thinner and smaller yellow capacitor with better placement for easier hilt integration
 Dual Digital Sensor motion detection. Identical to CF MotionFusion™, very high swing sensitivity and vibration & battery ripple immune
Mute during power off. Optional silenced power-off sound when MOTG is engaged
3 channel color mixing with FlexiBlend™- 4A per channel
RGB Neopixel / WS2812 (and alike) support with adjustable timings
 Ledstrip power saving StripOff™
Ledstrip data output/line with onboard resistor (aka LS pad)
Ledstrip localized & Accurate Blaster Bolt deflection AccuBolt™
 Omnisabers support / Omnisabers Ready
Override master file + individual configuration files for font specific settings
Fully designed from scratch by Plecter Labs,PRIZM is the single cell little brother of our former Crystal Focus Saber Core sound board. It features a luxeon controller and an interactive motion sensitive sound unit. It plays digital quality sound samples (22KHz / 16 bits) for  power on,  humming,  swing (up to 16 slots), clash (up to 16 slots), blaster (4 slots), blade lockup, force pushand power off. On/Off control of the module can be done with a latching switch or a momentary switch (setup with our SD-Config™ technology). The switch must be purchased separately.
Our module also triggers additional effects such as blaster ray blocking and blade lockup with an additional auxiliary button (not provided). Sounds and setup can be changed by the user using a simple USB SD card reader. Comes with a microSD card. Wiring supplies and speaker to be ordered separately.PRIZM also features A-POP technology : Anti Power On/Off Protection. An option on the configuration file can require that the user confirm the saber power off using the aux. button. This avoids any accidental power off of the saber, especially when using momentary buttons for activation.Just like CF and our other boards, the PRIZM handles WAV files !Features & Maximum Ratings
Dimensions : 1.6" x .93" x .20" (with the microSD card).Power supply : SINGLE CELL !!! 5.5V MAX / 3.5A (with the Luxeon LED). 1 li-ion cells (18650 or 14500) battery recommended.Up to 10 color profiles allowing the real time color change within a font. The use of a momentary is preferred as more natural to switch color, but there is support for latching too.Up to 6 sound fonts. Now with automatic font amount detection, board ships with the PC3 usual set of 3 fonts, but you can have only 2 or 6 if you like.Blaster Blocking, Force, Force Clash™ and Lockup Fx

Blade Flickering Fx

Blade Shimmering on Clash

Blaster Sounds

Up to 4 boot sounds

Up to 16 swing and 16 clash sounds

Flash on Clash™ (FoC™)

Anti Power Off technology (A-POP™)

32 stage accent LED sequencer

WAV file support

True 16 bit, 22.050 kSamples/sec crystal clear DAC

SD card support: up to 16GB (SD & SDHC), FAT16 or FAT32. Sandisk and Kingston brands preferred.

Accent LEDs : 4

Accent LEDs pad current source : 18 mA max per pad

Handles momentary or latching for blade activation

Compatibility : luxeon star III, V, K2, rebel, seoul P4, Ledengin, tri-rebel, tri-cree

Speaker : 4-8 ohm, up to 2W. NOT provided, must be purchased separately.

Idle current consumption : 9 mA (deep sleep mode)

Real Time Configuration Editor (R.I.C.E.™)

£75.00 exc. VAT (£90.00 inc. VAT)

SHIPPING , PLEASE SELECT TRACKED AND SIGNED.

All board orders have to be shipped with Tracked service, orders will be amended if required.

Category:

18 in stock